User Manual

AC1200 WiFi Cable Modem Router Model C6220
Specify Network Settings User Manual60
2. Type http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > WPS Wizard.
A page displays that explains WPS.
5. Click the Next button.
The WPS page displays.
6. Select the radio button for the setup method that you want to use.
• Push button. Click the WPS button on this page.
• PIN Number. The page adjusts. Enter the client security PIN, and click the Next
button.
7. Within two minutes, go to the client device and use its WPS software to connect to the WiFi
network.
The WPS process automatically sets up your WiFi computer with the network password
when it connects. The modem router WPS page displays a confirmation message.
Specify Basic WiFi Settings
The modem router comes with preset security. This means that the WiFi network name
(SSID), network key (password), and security option (encryption protocol) are preset in the
factory. You can find the preset SSID and password on the modem router label. The preset
SSID and password are uniquely generated for every device to maximize your WiFi security.
If you change your preset security settings, make a note of the new settings and store it in a
safe place where you can easily find it.
If you use a WiFi computer to change the WiFi network name (SSID) or other WiFi security
settings, you are disconnected when you click the Apply button. To avoid this problem, use a
computer with a wired connection to access the modem router.
To specify basic WiFi settings:
1. Launch a web browser from a WiFi-enabled computer or mobile device that is
connected to the network.
2. Type http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the modem router user name and password.