Quick Reference Guide

Supported AT Command Reference
60 2130617
Command reference
Table 4-2: Diagnostic command details
Command Description
!MXSTATS=0
!MXSTATS?
Supporting modems:
• All
Displays / clears 27.010 statistics
TS 27.010 is a standard that defines a multiplexing protocol between a
mobile station and a terminal. This standard is supported on the modem
and AT!MXSTATS is used to display statistics related to that protocol for
debugging purposes.
Usage:
• AT!MXSTATS=0 clears the statistics.
• AT!MXSTATS? reports the statistics.
The command AT!MXSTATS? returns these statistics:
• Sessions Started
• Sessions Ended
• SABM (Tx/Rx)
• DISC (Tx/Rx)
• UA (Tx/Rx)
• DM (Tx/Rx)
• UIH (Tx/Rx)
• T1 expiry
• T2 expiry
• T3 expiry
• N1 count
• N2 count
• Bad Frame (addr)
• Bad Frame (ctl)
• Bad Frame (len)
• Bad Frame (F9)
• Bad Frame (fcs)
• Bad Frame (mem)
Values are accumulated until cleared (by issuing the command
AT!MXSTATS=0).