Installation Guide

Configuring Your Account
Rev 2 Feb.11 31
5. SelecttheAdvancedfolderifyouwanttoset3GWatcherto
launchyourInternetbrowser,VPN,oranyotherprogram
automatically,orifyourserviceproviderspecifiedanIP
addressorDNSaddress(es).Otherwise,click
OKandskip
toStep10 .
6. SelecttheLaunch after connectingfield,andfromthe
drop‐downlist,selectwhichapplication,ifany,youwant
3GWatchertoautomaticallylaunch whenaconnectionis
establishedwiththisprofile:
·
None—Noapplicationisautolaunched.
·
Browser—3GWatcherautolaunchesyourdefault
Internetbrowser.
·
MS VPN—3GWatcherautolaunchesaVPNconnection.
·
Application—3GWatcherautolaunchesaninstalledVPN
program,oranyotherprogram.
7. Completetheappropriatefield,dependingontheoption
youchoseintheLaunch after connectingfield:
· Ifyouselected
Browser —intheURLfield,typetheURL
forthewebsiteyouwanttoviewonconnection(suchas
www.sierrawireless.com).
· Ifyouselected
Microsoft VPN—intheMicrosoft VPN
(PPTP) connectionfield,selecttheVPNconnectionfrom
thedrop‐downlist.
· Ifyouselected 
Application —inthe Applicationfield,enter
thepathtotheprogram orusethebrowsebuttonto
locatethe.exefileforthesoftwareapplicationyouwant
toautolaunch.
8. IfyourserviceproviderhasgivenyouanIPaddress,inthe
Advancedfolder,selectTCP/IP.SelectStatic IP andenterthe
addressinthefieldbelow.Otherwise,select
Dynamic IP.
(ThisisthedefaultbecausemostnetworksusedynamicIP
addressing.)UsethedatacompressionorIPheader
compressionfieldsifsupportedbyyourserviceprovider.
Note: Do not select the Use IP header compression field unless your
service provider is using this compression. The AirCard modem
cannot maintain a connection if this is enabled but not supported on
the network.
9. IfyouhaveaDNSaddressoraddresses,clickDNS Settings
andentertheaddress(es).(Inmostcases,itisnotnecessary
toenteraDNSaddress.)
10. Ifyouhavemorethanoneprofile,select
Profiles,andinthe
Default Profilefieldchoosethedefaultprofilefromthe
drop‐downlist.(The“default”profileistheoneusedby
theAutoconnectfeature,and isalsousedifyouclick
Connectwithoutselectingaprofile.)