Quick Start Manual

62 Using Your Device
Section 4J
Viewing Device Information
To view information about your device:
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click Device > About.
Note: 4G information is not available if WAN mode is “3G only.” (WAN mode is in Advanced
settings > WAN > Setup
.)
The following information is displayed:
●
Model Number
● Manufacturer
● Software Version — Firmware version for the routing hardware of the device.
●
Activation Status — 3G activated or not activated.
●
Activation Date — Date that the 3G modem was first activated.
●
Network Operator — The carrier that your device was activated for.
●
Wi-Fi Firmware Version
● Router PRI Version — PRI version for the routing hardware of the device. The PRI (Product Release
Instructions) is a file that contains the settings used to configure wireless products for a particular
service provider, customer, or purpose.
●
ESN or MEID (3G).
The ESN (Electronic Serial Number) is the unique first-gener
ation serial number assigned to the 3G
component of the device.
The MEID (Mobile Equipment Identifier) is the unique second-generation serial number assigned to
the 3
G component of the device.
●
PRI Version — PRI version of the 3G component of the device.
●
MSID (Mobile Station ID) — Also known as IMSI (International Mobile Station Identity) — an identifier
of a device on the 3G network.
●
PRL Version — The PRL (Preferred Roaming List) is an account configuration item set by your
service provider. It controls the radio channels and network carrier used by the 3G modem. An
updated PRL may improve your 3G network service.
●
Firmware Version — Firmware version of the 3G component of the device.
●
MAC Address — MAC address of the 4G module. Each wireless device has a unique MAC address
(assigned by its manufacturer).
●
Firmware Version — Firmware version of the 4G component of the device.