Quick Start Manual

Settings 93
Settings
Section 5I
GPS Settings
⽧ Setting the GPS Mode (page 93)
⽧ Setting the GPS Fix Rate (page 94)
⽧ Using Metric Units (page 94)
⽧ Changing Your Mapping Service (page 94)
⽧ Performance Setting (GPS) (page 94)
⽧ Accuracy (page 95)
Basic GPS settings can be changed in the GPS I
nformation and Settings window. See “GPS
Information and Settings” on page 44.
Additional settings are available at
Advanced settings > WAN > GPS.
Setting the GPS Mode
GPS mode determines whether the location fix is done:
● Once (
“one-time”), or
● P
eriodically (“continuous”) — used, for example, for navigation/turn-by-turn (TBT) applications.
To set the GPS mode:
1. Ensure you’re logged in to the home page.
2. Click Advanced settings > WAN > GPS.
3. If the Enable GPS check box is not selected, select it.
4. Select one of the following:
䡲
One-time — Use a single fix. Use this option if you’ll be using your device at the same
location.
Tip: If you want to get a fix now, click Get fix now.
䡲 Continuous — Obtain fixes on a regular basis. Also known as auto-tracking. Useful for
navigation or turn-by-turn (TBT) applications (for example, driving directions).