User Guide

Table Of Contents

Using Your Device

Rev 1.0 Apr.10 65

Manually Checking for Updates

Note: During installation of the update:

• DO NOT turn off or unplug the device.

• Your Wi-Fi and Internet connections won’t be available.

When the installation is complete, you will need to reconnect to Wi-Fi. (See

"How Do

I Connect to Wi-Fi?" on page 110).

Checking for updates

1. Log in to the home page.

2. Ensure you're connected to 3G/4G.

3. Click

Advanced settings().

4. Click

Device > Basic.

5. Click

Check for updates now. (The message next to the button indicates

whether updates are available.)

Installing the updates

If updates are available, after you've manually checked for updates:

1. Ensure your device is connected to the power adapter or computer, through

the USB cable.

Note: If you’ll be using USB for data transfer (and not just for charging the device), you

must install the device driver. See "Making a Tethered Connection" on page 43.

2. Click Update options.

3. Read the information in the Software Installation Options window.

4. To install the updates, click

Download and install now.

— or —

If you are not in a strong signal area, make a note of the URL displayed in the

window and click

I’ll get the update later. At a later time, access the URL to

download the update to your computer, and then follow the steps in "Upgrade

Firmware From a File" on page 65.

5. When the installation is complete, reconnect to Wi-Fi. See "How Do I Connect

to Wi-Fi?" on page 110.

Upgrade Firmware From a File