User Guide

Using Your Device
Rev 1.0 Apr.10 57
Internet Connection Information
Note: Data usage amounts are approximate and should not be used for billing purposes.
For accurate data usage amounts, check with CLEAR.
Click the data icon to display the Internet Connection Information window.
The window displays:
• Data statistics for the current connection session:
· Data sent
· Data received
· Total transferred
· Session duration
• The WWAN IP address of the device — the external IP address of the
modem (3G or 4G) — that is, the IP address of the modem as seen from the
Internet.
Viewing and Configuring Detailed Internet Connection Information
When you're logged in, the Internet Connection Information window displays a
table showing data use:
• In the currently billing cycle. These numbers get automatically reset to 0 on
the day selected in the
Starts on day list.
• Over the lifetime of the device.
• By network (3G/4G), and by sent/received/total.
From this window you can:
• Reset the data usage figures for the current billing cycle. (Click
Reset.)
• Change the start day of the billing cycle (in the
Starts on day list).
microSD Card Information and Settings
The text next to the icon indicates whether the card is:
• Enabled
• Detected
• Accessible by all ("shared") or only the administrator
• Accessible with or without a password (security)
Click the icon to display the SD Card Information and Settings window. The
window displays:
• The card status (see the above list)
• Storage capacity of the card, and space available
When you're logged in, you can:
• Enable or disable the microSD card slot. See "Enabling the microSD Card
Slot" on page 61.
• Set up access to the card. See "Setting Up Access to the microSD Card" on
page 61.