User Guide
Table Of Contents
- Contents
- Preface
- Important Notice
- Safety and Hazards
- Limitation of Liability
- Patents
- Licenses
- Copyright
- Trademarks
- Contact Information
- Additional Information and Updates
- Revision History
- 1: Device Basics
- 2: Your Device
- 3: Installing and Setting Up the Device
- 4: Using Your Device
- 5: Settings
- 6: Resources
- 7: Technical Specifications, Safety Information, and Regulatory Information
- Index
Clear Spot 4G+ User Guide
104 2131352
2. Find the small hole below and to the right of the battery compartment. The
reset button is inside this hole.
3. Insert a thin object (for example, the end of a paper clip) into the hole, and
lightly press on the bottom of the hole
for five or more seconds.
4. Replace the battery compartment cover.
5. Check the device LCD. If it displays "Reset to factory defaults? Press to
accept", press the power button on the device.
6. Follow the instructions on the device LCD.
Resetting the Software to Default Settings (Through the Browser Interface)
Warning: If you reset the software to default settings:
• You must go through the device setup (
page 37), as if you've just purchased the device.
• Any changes you've made to the settings are lost.
Your 3G and 4G account information is not affected; after reset, the device remains provi-
sioned for service.
1. Log in to the home page.
2. Click
Advanced settings ().
3. Click
Router > Basic.
4. Click
Router Settings Reset.
Reset button