Quick Start Manual
5.18.2010
Radius: 13mm
Connect Power
1. Insert the battery into the Clear Spot by sliding open the bottom cover.
Make sure the metal contacts on the battery and Clear Spot align.
2. Plug the Micro-USB cable into the device and connect the other end to
the wall charger.
3. Charge the battery completely (charge for at least 3 hours or until the
battery status indicator is full).
4. After your Clear Spot is completely charged, turn on the Clear Spot by
pressing and holding the Power button for 2-3 seconds. The device will
automatically activate when a 4G network is acquired. When activation is
successful, the LCD will briefly display “Activation complete” before
trying to establish a network connection.
clear spot 4G+ QSG: p5
5.18.2010
Radius: 13mm
Once activated, your Clear Spot 4G+ Personal HotSpot will display its
device name and password on its built-in LCD display. You can now connect
c^cWT2[TPaB_^cUa^\h^daFX5XT]PQ[TSSTeXRTbQhU^[[^fX]VcWTbTbcT_b)
1. With your computer’s Wi-Fi turned on, view the list of available wireless
(Wi-Fi) networks.
2. Select from this list the name displayed on your Clear Spot LCD display
and click “Connect.”
3. When prompted enter the password shown on your Clear Spot LCD
display. Press the power button briefly if the display has turned off.
4. Once your computer is successfully connected to your Clear Spot via
Wi-Fi, launch your computer’s web browser. You will see the Clear Spot
setup page.
Connect to Clear Spot via
Wi-Fi from your Computer
clear spot 4G+ QSG: p6