Aircard User Guide(How to setup Netgear Aircard 810 hotspot)
Table Of Contents
- Telstra Wi-Fi 4GX Advanced III AirCard 810S
- Contents
- 1. Get Started
- 2. Use Your Mobile Hotspot
- 3. Advanced Settings
- 4. Frequently Asked Questions
- Why can’t I connect a device to the hotspot?
- Why can’t I access the Internet?
- Why isn’t my battery charging?
- Why is the signal indicator always low?
- Why is the download or upload speed slow?
- How do I go back to the hotspot web page?
- What do I do if I forget my admin login password?
- How do I disconnect from the mobile broadband network?
- Why doesn’t the Connect / Disconnect button appear on the hotspot web page?
- How can I extend the life of the battery?
- How do I turn the hotspot off?
- How do I find out how many users are connected to my hotspot’s Wi-Fi networks?
- The touch screen is not lit. How do I know if the hotspot is still powered on?
- How do I find my computer’s IP address?
- How do I find a device’s MAC address?
- Where can I find more information?
- 5. Troubleshooting
- The Wi-Fi network name does not appear in the list of networks
- The No Signal icon displays on either the touch screen or the hotspot web page
- Your device cannot access the hotspot web page when connected to a VPN
- The hotspot cannot connect to a computer running Windows Vista
- The hotspot does not connect to your service provider’s network
- Reset the hotspot
- View Alerts
- A. Specifications
- B. Tips and Safety Guidelines for Lithium-Ion Batteries
Get Started
7
Telstra Wi-Fi 4GX Advanced III
Note: You cannot charge the hotspot while it is boosting another device.
To start the jump boost of another device from the touch screen:
1. Plug the jump boost cable into your hotspot.
2. Plug the device that you want to charge into the other end of the jump boost cable.
On the Home screen, a pop-up window appears with boost options. If the pop-up window
does not display, tap Settings > Jump Boost.
3. Tap one of the boosting options (30, 60, or 90 minutes).
To start the jump boost of another device from the hotspot web page:
1. Plug the jump boost cable into your hotspot.
2. Plug the device that you want to charge into the other end of the jump boost cable.
3. On the home page, log in as an administrator.
4. Click the Jump Boost button.
5. Select one of the boosting options (30, 60, or 90 minutes).
Set Up and Connect to the Internet
To install the battery and micro SIM card in your hotspot, complete the steps in the sections
listed in steps 1 and 2.
To set up and connect to the Internet:
1. Install the Micro SIM card.
For more information, see Install the Micro SIM Card on page 8.
2. Install the battery.
For more information, see Install the Battery on page 9.
3. Connect to the Internet.
For more information, see Connect to the Internet on page 10.
4. Personalise the hotspot.
For more information, see Personalise the Hotspot on page 10.