User manual

Advanced Settings
90
AirCard 810 Mobile Hotspot
The Submit button displays after you make a selection.
9. Click the Submit button.
Your settings are saved.
Enable IP Pass-Through Mode
To turn off the mobile hotspot router functionality and assign the network IP address directly
to the attached device, enable IP pass-through.
If you make this change, the attached device restarts using a different driver configuration.
WARNING:
If you enable this feature, WiFi is disabled and you must use a USB
cable to tether the device.
Note: This feature is available to Windows computer users. If you are a Mac
user, do not enable this option because you will be unable to access
your device.
 To enable IP pass-through mode:
1. From a computer or WiFi device that is connected to your network, launch an Internet
browser.
2. Enter http://netgear.aircard or http://192.168.1.1.
Your device might use a different web address. To get the web address for your device,
tap Settings > More > Device Information > AC810S Manager or look at the label
under the device battery.
A login window opens.
3. Enter the administrator login password.
The default password is password. The password is case-sensitive.
The home screen displays.
4. Select Settings > Router > Basic.
The Basic page displays.
5. In the LAN section, select the IP Passthrough Mode Enabled radio button.
6. Click the Submit button.
Your settings are saved.