User manual

Get Started
9
AirCard 810 Mobile Hotspot
Power Button
Use the Power button to wake the mobile hotspot and to power the device on and off.
Table 1. Power button usage
Desired Result Action
Turn on the mobile hotspot. Press and hold the Power button for three seconds.
Turn off the mobile hotspot. Press and hold the Power button for five seconds.
Wake the WiFi signal and
screen.
Press and quickly release the Power button.
Status LED
The LED indicates the device’s connection status.
Table 2. LED indicator patterns
Color LED Pattern What the Pattern Means
Blue Slow blink
(every five seconds)
The data connection is ready for use. WiFi is on, the WWAN
is connected, and WiFi devices are available.
Amber Blink
(every five seconds)
The data connection is not ready for use (disconnected or
no signal).
Blue Double-blink
(every five seconds)
Data is transferring (uploading or downloading) on the data
connection.
Blue /
amber
Slow blink, alternating
blue and amber
The device is installing firmware or software updates.
Touch Screen
The mobile hotspot’s touch screen displays the following information:
• WiFi name and password.
• Network signal icons. See Table 3 on page 10 for details.
• Data usage details.
• WiFi details (number of connected devices).
• System alerts.
• Network provider message notification.
For advanced settings, use a WiFi-enabled device to connect to the mobile hotspot and then
visit the mobile hotspot web page at http://netgear.aircard or http://192.168.1.1.