User manual

Advanced Settings
88
AirCard 810 Mobile Hotspot
Enable Port Forwarding
If your computer is hosting a server, you can enable port forwarding so that other users can
access the server.
 To enable port forwarding:
1. From a computer or WiFi device that is connected to your network, launch an Internet
browser
.
2. Enter http://netgear
.aircard or http://192.168.1.1.
Your device might use a different web address. To get the web address for your device,
tap Settings > More > Device Information >
AC810S Manager or look at the label
under the device battery.
A login window opens.
3. Enter the administrator login password.
The default password is password.
The password is case-sensitive.
The home screen displays.
4. Select Settings > Router > Port Forwarding.
5. Select the Enable radio button.
The Port Forwarding table displays.
Incoming traffic is forwarded to specific ports and devices on your network using their
local IP addresses.
Note: Port forwarding creates a security risk. When not required, disable port
forwarding.
6. Enter the following port forwarding information:
• Label. Enter a descriptive name.
• IP. Enter the IP address of a connected device.
• Port. Enter the port number that the application uses.
• Protocol. If you are unsure, select TCP/IP.