Aircard AC790s-Specifications-Datasheet
Table Of Contents
- BigPond Wi-Fi 4G Advanced II AirCard 790S
- Contents
- 1. Get Started
- 2. Use Your Mobile Hotspot
- 3. Advanced Settings
- 4. Frequently Asked Questions
- Why can’t I connect a device to the hotspot?
- Why can’t I access the Internet?
- Why isn’t my battery charging?
- Why is the signal indicator always low?
- Why is the download or upload speed slow?
- How do I go back to the hotspot web page?
- What do I do if I forget my admin login password?
- How do I disconnect from the mobile broadband network?
- Why doesn’t the Connect / Disconnect button appear on the hotspot web page?
- How can I extend the life of the battery?
- How do I turn the hotspot off?
- How do I find out how many users are connected to my hotspot’s Wi-Fi networks?
- The touchscreen is not lit. How do I know if the hotspot is still powered on?
- How do I find my computer’s IP address?
- How do I find a device’s MAC address?
- Where can I find more information?
- 5. Troubleshooting
- The Wi-Fi network name does not appear in the list of networks
- The No Signal icon displays on either the touchscreen or the hotspot web page
- Your device cannot access the hotspot web page when connected to a VPN
- The hotspot cannot connect to a computer running Windows Vista
- The hotspot does not connect to your service provider’s network
- Reset the hotspot
- View Alerts
- A. Specifications
Advanced Settings
84
BigPond Wi-Fi 4G Advanced II
4. Select Settings > Network > APN.
5. Click the Add button.
6. Enter the name of the network service provider and the
APN that you obtained from it.
7. Enter the user name and password, if they are required for the wireless network.
8. Select the network authentication mode:
• None
• PA
P
• CHAP
• P
AP or CHAP
9. Change the PDP (data protocol), if necessary:
• IPV4
• IPV6
• IPV4V6
10. Change the PDP roaming protocol, if necessary:
• None
• IPV4
• IPV6
• IPV4V6
Note: PDP roaming protocol is the IP protocol used while you are roaming
(for example when you are traveling and the roaming network does
not support IPv6).
11. Click the + symbol next to the new
APN entry.
The entry is added to the table.