Aircard AC790s-Specifications-Datasheet
Table Of Contents
- BigPond Wi-Fi 4G Advanced II AirCard 790S
- Contents
- 1. Get Started
- 2. Use Your Mobile Hotspot
- 3. Advanced Settings
- 4. Frequently Asked Questions
- Why can’t I connect a device to the hotspot?
- Why can’t I access the Internet?
- Why isn’t my battery charging?
- Why is the signal indicator always low?
- Why is the download or upload speed slow?
- How do I go back to the hotspot web page?
- What do I do if I forget my admin login password?
- How do I disconnect from the mobile broadband network?
- Why doesn’t the Connect / Disconnect button appear on the hotspot web page?
- How can I extend the life of the battery?
- How do I turn the hotspot off?
- How do I find out how many users are connected to my hotspot’s Wi-Fi networks?
- The touchscreen is not lit. How do I know if the hotspot is still powered on?
- How do I find my computer’s IP address?
- How do I find a device’s MAC address?
- Where can I find more information?
- 5. Troubleshooting
- The Wi-Fi network name does not appear in the list of networks
- The No Signal icon displays on either the touchscreen or the hotspot web page
- Your device cannot access the hotspot web page when connected to a VPN
- The hotspot cannot connect to a computer running Windows Vista
- The hotspot does not connect to your service provider’s network
- Reset the hotspot
- View Alerts
- A. Specifications
Use Your Mobile Hotspot
57
BigPond Wi-Fi 4G Advanced II
To recharge the battery from a wall socket:
1. Attach one end of the micro USB cable to the connector on the right on the mobile
hotspot and attach the other end to the wall charger (included).
2. Plug the wall charger into a wall socket.
A lightning bolt appears on the Battery icon when the battery is charging (
).
The Battery icon on the touchscreen indicates when the battery is fully charged (
)
and a notification displays.
Note: The battery continues to charge when the hotspot is powered off.
To recharge the battery from the USB port on your computer:
1. Attach one end of the micro USB cable to the mobile hotspot and plug the other end into
the USB port on your computer
.
The Battery icon includes a lightning bolt to indicate that the battery is charging ( ).
The Battery icon on the touchscreen indicates when the battery is fully charged (
)
and a notification displays.