User's Guide

Rev 3 Sep.13 13
2
2: Use Your Mobile Hotspot
This chapter provides information on how to use your mobile hotspot.
Note: To change settings you need to be logged in as Administrator. See Set up
and connect to the Internet on page 11.
Add a wireless device to your Wi-Fi
network
You can connect up to fifteen wireless devices such as smart phones,
laptops, tablets, digital cameras, printers, gaming consoles, and digital
picture frames to your mobile hotspot network.
You can add a wireless device to your Wi-Fi network manually, or if the
device you are adding is Wi-Fi Protected Setup (WPS) enabled, you can
use the WPS method to connect the device without using the Wi-Fi
password.
Add a device manually
1. On the wireless device you want to add to your network, view the list
of available Wi-Fi networks.
2. Connect to the network that corresponds to your mobile hotspot
network, as displayed on the LCD.
3. When prompted, enter the Wi-Fi password for your mobile hotspot
network. The Wi-Fi password is displayed on the mobile hotspot LCD
screen. (If the screen has turned off to save power, press and quickly
release the power button to wake up the screen.)
Add a WPS-enabled device
You can add a WPS-enabled Wi-Fi device to your Wi-Fi network without a
Wi-Fi password, using the homepage or the mobile hotspot LCD screen.
On the LCD touchscreen:
1. On the home screen, tap Wi-Fi > WPS.
2. Tap Pair with Main Wi-Fi or Pair with Guest Wi-Fi.
3. Within two minutes (120 seconds), press the WPS button on the
wireless device you want to connect.
Your mobile hotspot and the wireless device will communicate and
establish the connection.
On the homepage:
1. On the homepage, log in as Administrator.