User Manual

Join a WiFi network using the built-in Windows tool
After you install the adapter (see Set up your adapter with a Windows-based computer
on page 6), you can use the built-in Windows configuration tool (the Connect to a
network tool) to connect the adapter to a WiFi network.
To join a WiFi network on a Windows-based computer:
1.
Depending on the Windows version, select the Network or icon in the notification
area of your screen.
The Connect to a network tool opens and a list of WiFi networks in your area displays.
Note: You can also open the Connect to a network tool from the Network and
Sharing Center at the following path:
•
Windows 10. Select Start > Settings > Network & Internet > Status > Network
and Sharing Center, and click Connect to a network.
•
Windows 7, 8, or 8.1. Select Start > Control Panel > Network and Sharing
Center, and click Connect to a network.
2.
From the list of networks, select the WiFi network, and click the Connect button.
A pop-up window opens
3.
If the WiFi network is secured, enter the security key (and, if applicable, other required
security information), and click the OK button.
The security key is also referred to as the WiFi passphrase or WiFi password.
If the security key is identical to the one that is defined for the WiFi network, the
adapter lets the computer join the network, which can take a few minutes.
User Manual7Install Your Adapter and
Connect to a WiFi Network
AC1200 WiFi USB Adapter Model A6150 User Manual