Reference Manual

AirCard 77Xs/34xU AT Command Reference
26 Proprietary and Confidential 4114487
$QCMIPMASPI
Set/return active profile’s AAA SPI
Set or return the active profile’s Mobile Node AAA Security Parameter Index (SPI)
Password required: No
Usage:
• Execution: AT$QCMIPMASPI=<mipSPI>,<NVCommitState>
Purpose: Set the active profile’s AAA SPI and indicate if it is to be committed to
NV.
• Query: AT$QCMIPMASPI?
Response: Returns <mipSPI> and <NVCommitState>
Purpose: Display the active profile’s AAA SPI and indicate if it is committed to
NV.
Parameters:
<mipSPI> (Security Parameter Index)
• Valid range: 0–4294967295
<NVCommitState> (Current <mipSPI> value committed to NV?)
• 0=Do not commit to NV.
Note: If <mipSPI> is not committed to NV, the value is deleted at the end of the
next MIP session or when AT$QCMIPP is called.
• 1=Commit to NV.
$QCMIPMASS
Set/return active profile’s AAA ‘shared secret’ (ASCII)
Set or return the active profile’s Mobile Node AAA shared secret in ASCII format.
Password required: No
Usage:
• Execution: AT$QCMIPMASS=”<secretASCII>”,<NVCommitState>
Purpose: Set the shared secret and indicate if it is to be committed to NV.
Note: The command returns ERROR if <secretASCII> is too long.
• Query: AT$QCMIPMASS?
Response: Returns shared secret status (set/unset) and <NVCommitState>
Purpose: Display shared secret status and indicate if it is committed to NV.
Parameters:
<secretASCII> (Shared secret in ASCII format)
• For execution formation, must be enclosed by double quotes.
<NVCommitState> (Current <secretASCII> value committed to NV?)
• 0=Do not commit to NV.
Note: If <secretASCII> is not committed to NV, the value is deleted at the end of
the next MIP session or when AT$QCMIPP is called.
• 1=Commit to NV.
Table 4-2: Mobile IP commands (Continued)
Command Description