Quick Start Guide

Quick Start Guide
Blue
The connection between the
Outdoor Orbi and Orbi router is
good.
Amber
The connection between the
Outdoor Orbi and Orbi router is fair.
Consider moving the Orbi closer to
the Orbi router.
Magenta
The Outdoor Orbi was unable to
connect to the Orbi router. Move
the Outdoor Orbi closer to the Orbi
router.
Manually Sync Your
Outdoor Orbi With Your
Orbi Router
1. Place your Orbi indoors in an area near
your Orbi router.
You can move your Orbi outdoors aer
it syncs with your router.
2. Connect your Orbi to a power source.
The Power LED on the back of the Orbi
lights. If the Power LED does not light,
press the Power On/O button.
3. Press the WPS On/O button on the
back of your Outdoor Orbi, and within
two minutes, press the Sync button on
the back of your router.
The Orbi router’s bottom LED turns o
aer the setup is complete.
Outdoor Orbi Sync LED
Colors
The bottom LED on the Outdoor Orbi lights
white while it attempts to sync with your
Orbi router. Aer the bottom LED lights
white, it lights one of the following colors
for about three minutes and then turns o:
1
Outdoor Orbi Overview
Before placing your Orbi outdoors, sync
your Orbi indoors in an area near your Orbi
router. You can move your Orbi outdoors
aer it syncs with your router.
You can place the Orbi a flat surface using
the stand, or you can wall-mount it. For
information about attaching the Orbi to a
stand or wall-mounting it, see the other
side of this document.
Top LED
Bottom LED
LED On/O button
WPS On/O button
Reset button
Power LED
Power On/O button
DC Power connector
2
1
3
4
5
6
3
5
4
August 2017
2
7
BETA DOCUMENT
6
7
8
8