Getting Started Guide

17
A login page displays.
4. Click the NEW EXTENDER SETUP button.
5. Complete the elds on the page.
How do I restore the extender to its factory default settings?
1. Use a sharp object such as a pen or straightened paper clip to
press and hold the Factory Reset button on the extender for
at least ve seconds until the Power LED blinks amber.
2. Release the Factory Reset button and wait for the extender to
reboot.
The extender resets and returns to the factory default settings.
I enabled a WiFi MAC lter, wireless access control, or access
control list (ACL) on my router. What should I do when
installing the extender?
When a device connects through the extender to your router, the
MAC address of the device shown on the router is translated to
another MAC address. If your router’s MAC lter, wireless access
control, or ACL is enabled, the device connects to the extender
but can’t get an IP address from the extender and can’t access the
Internet.