Getting Started Guide
12
3. Connect a computer or mobile device to the extender using a
WiFi or Ethernet connection:
• WiFi. On your WiFi-enabled computer or mobile device,
join the extender WiFi network NETGEAR_EXT.
Note: NETGEAR_EXT is the extender’s default WiFi
network.
When your WiFi-enabled computer or mobile device is
connected to the extender, the Client LED lights.
• Ethernet. Use an Ethernet cable to connect the Ethernet
port on the extender to an Ethernet port on your
computer.
Note: You must do this before you connect your extender
to your modem router or router.
4. Launch a web browser and visit www.mywiext.net.
The NETGEAR installation assistant displays.
5. Use an Ethernet cable to connect an Ethernet port on your
router to the extender’s Ethernet port.