User's Manual

NETGEAR, INC.
350 East Plumeria Drive San Jose, CA 95134
8
4 Execute AT command
4.1 Connect to NMEA port of module.
After the NMEA port was shown on device manager.
You can connect to it via Tara Term tool. (or putty)
Then you can use it to send AT command to module.
5 Connect to QPST
5.1 Add Diagnostics port
After the Diagnostics port was shown on device manager. Then you can use “QPST
Configuration” tool to add Diagnostics port. Please follow the steps on the screenshot to add
port.