User's Manual

NETGEAR, INC.
350 East Plumeria Drive San Jose, CA 95134
4
2 Setup/connect the device for testing.
2.1 Install USB driver.
2.2 Adjust jumpers on carrier board.
2.3 Insert Nano SIM card into NM8207 module.
2.4 Connect NM8208 module with carrier board
A particular attention must be paid, please make sure the board to board connectors are perfect
aligned before pushing down the NM8207 module toward the carrier board.
Caution: An inappropriate installation will break the board to board connectors permanently.