User's Manual
Table Of Contents
- Nighthawk M1 4GX Gigabit LTE Mobile Router Model MR1100
- Contents
- 1. Get Started
- 2. Connect to the Mobile Router
- 3. Manage Battery Usage and Charging
- 4. Manage Your Internet Connection
- 5. Control Internet Access
- 6. Specify Mobile Router Network Settings
- 7. Share Media and Storage
- 8. Manage Your Mobile Router Network
- View the Network Status
- View Mobile Router Device Status
- View WiFi Details
- View a Network Map
- View Connected Devices
- Update the Mobile Router Firmware
- Change the admin Password
- Manage SMS Messages
- LED Settings
- Back Up and Restore the Mobile Router Settings
- Factory Reset
- Reboot the Mobile Router
- Power Off the Mobile Router
- View Details About Your Mobile Router
- 9. Frequently Asked Questions
- Why can’t my device connect to the mobile router?
- Why can’t I access the Internet?
- Why is the signal indicator always low?
- Why is the download or upload speed slow?
- What do I do if I forget my admin login password?
- How do I disconnect from the mobile broadband network?
- The LCD is not lit. How do I know if the mobile router is still powered on?
- How do I find my computer’s IP address?
- How do I find a device’s MAC address?
- Where can I find more information?
- 10. Troubleshooting
- A. Specifications
Control Internet Access
42
Nighthawk M1 4GX Gigabit LTE Mobile Router
Enable SIM Security
If you enable SIM security, you must enter a SIM PIN each time you power on the mobile
router.
Enable SIM Security From the NETGEAR Mobile App
To enable SIM security:
1. On your smartphone, connect to the mobile router
’s WiFi network.
2. Launch the NETGEAR Mobile app.
3. Swipe down.
The dashboard displays.
4. T
ap Security.
The Security page displays.
5. T
ap SIM Security.
The SIM Security page displays.
6. T
ap ACTIVATE.
The Enter SIM Security page displays.
7. Enter a PIN.
8. T
ap OKAY.
Your settings are saved.
If you enter an incorrect PIN three times, the SIM is blocked. If the SIM is blocked, contact
your network service provider to receive a PUK number to unblock the SIM.
Enable SIM Security From a Web Browser
To enable SIM security:
1. From a computer that is connected to your network, launch a web browser
.
2. Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select Settings > Network > SIM Security.
The SIM Security page displays.