Arlo Go Mobile HD Security Camera User Manual NETGEAR, Inc.
Support For product updates and web support, visit http://www.arlo.com/en-us/support/. Trademarks © NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only. Compliance For the current EU Declaration of Conformity, visit http://support.netgear.com/app/answers/detail/a_id/11621/. For regulatory compliance information, visit http://www.netgear.com/about/regulatory/.
Contents 1. Set Up Your System 7 What You Need to Install and Use Your Arlo Go Camera 7 Activate Your SIM Card��������������������������������������������������������������������������������������������������������������������������������������������������������������8 Get the Arlo app......................................................................................................................................................................................
3. Use an SD Card With Arlo Go 22 Supported SD Card Format �������������������������������������������������������������������������������������������������������������������������������������������22 Insert an SD Card..............................................................................................................................................................................
6.
Adjust Push Notifications��������������������������������������������������������������������������������������������������������������������������������������������������59 10.
1. Set Up Your System Setting up your Arlo Go camera involves a few simple steps. Your Arlo account lets you view videos from any Internet-connected computer or mobile device. You can use the same Arlo app to set up and manage Arlo Go and Arlo cameras.
Set Up Your System Activate Your SIM Card The camera uses the AT&T network to send pictures and video to your Arlo account in the cloud. ¾¾ To activate your SIM card: 1. If you know your AT&T Enterprise Sales Contact, contact that person with your Arlo Go SIM ICCID and device IMEI. Both the SIM ICCID and the IMEI display on the retail box. If you don’t know your AT&T Enterprise Sales Contact, call AT&T Mobility Sales & Services at 1-800-331-0500. 2. Select Find Your Account Representative.
Set Up Your System Insert the SIM Card into Your Arlo Go Camera The Arlo Go camera comes with an AT&T LTE SIM card installed. If a SIM card is not installed, insert a card into the SIM card slot. ¾¾ To insert a SIM card: 1. Unlock the battery compartment by pressing and holding the latch. SIM card slot 2. Gently pull the battery door back to open the compartment. 3. Align the gold SIM contacts. 4. Insert the SIM card into the SIM card slot.
Set Up Your System Set Up Your Arlo Go Camera Use the Arlo app and your Arlo account to set up your Arlo Go camera. If you already have an Arlo account, you can add the Arlo Go camera to your account. During setup, your Arlo Go camera must be connected to an AT&T network. This requires that you are using a compatible device and a mobile service plan. Additional restrictions and data charges might apply. Coverage and service are not available everywhere.
Set Up Your System 6. Select Arlo Go. 7. Follow the onscreen instructions. 8. When prompted, hold the QR code that is displayed on your smartphone 4 to 8 inches (10 to 20 cm) in front of the camera until you hear a chime sound. 9. Tap Yes if you heard a chime sound. If you did not hear a chime sound, do the following: a. Tap No. b. Move the camera closer to or farther away from the QR code. c. When you hear a chime sound, tap Continue. 10. Wait for the app to discover the Arlo Go camera. 11.
Set Up Your System 2. Attach the camera to the wall plate. If you’re mounting the camera to drywall, be sure to use the included plastic drywall anchors. Arlo Go Access and Cloud Storage The Arlo Go camera is designed to connect to the cellular network. During setup, the Arlo app uses the cellular network to find your Arlo Go camera so that you can add the camera to your Arlo account.
Set Up Your System Arlo Go Camera Position When placing your Arlo Go camera, keep these tips in mind: • Avoid placing the camera in an area that gets a lot of light shining directly into the camera lens. • You can configure Arlo Go cameras to monitor part of the field view and to detect motion only in the areas that you want monitor. • Keep active locations in the camera’s field of view. Arlo Go provides a 130-degree viewing angle.
Set Up Your System The camera LED lights solid blue for two seconds when the camera battery is fully charged. Note: You can buy spare Arlo Go rechargeable batteries and charge them in the Arlo Charging Station (sold separately). For uninterrupted Arlo Go camera use, we recommend that you keep a fully charged spare battery on hand Camera LED Guide The Arlo Go camera LEDs light in different colors to indicate how the camera is operating. Slow blinking amber Mobile network coverage is not available.
2. View Your Content Videos recorded by your Arlo Go camera are stored in a library. You can view your recordings, mark them as favorites, and search using the filter. View the Devices Page When you launch the Arlo app, the Devices page displays.
View Your Content View the Camera Feeds You can view your Arlo Go camera feed at any time. ¾¾ To view camera feeds: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. The icons above each camera feed depend on the rules in the currently selected mode. For information about these icons, see View the Devices Page on page 15. 2. To view and listen to a live feed, tap or click Live on the camera feed image.
View Your Content The Devices page displays. 2. Tap or click Live in the camera feed image. 3. Tap or click Microphone . A microphone button displays. 4. Wait for the button to turn bright green. This can take up to five seconds. When the button is bright green, Talk and Listen is ready. 5. Press and hold or or click and hold the microphone button and speak.
View Your Content Zoom a Camera Image To zoom a camera image: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Settings > My Devices. A list of cameras displays. 3. Tap or click the camera. The camera settings display. 4. Tap or click Video Settings. 5. Under Activity Zones, tap or click Zoom . 6. Resize and position the image box as necessary. 7. Tap or click the Zoom icon .
View Your Content The settings for the camera display. 5. Tap or click Video Settings. The Video Settings page displays. 6. Tap or click Rotate Image. 7. The camera feed image is inverted. Cloud Recording With cloud recording, everything the Arlo Go cameras record is sent to the cloud for secure storage in your library. You can access these recordings from anywhere you are using a mobile device, or on a Windows or Mac computer. All recordings are encrypted with the user name and password you create.
View Your Content 3. If it is more than one month since you started recording, use the arrows on either side of the month to choose a month to view. Days on which a video clip was recorded are indicated with a green circle. 4. Tap or click a highlighted date. Recordings from that date display below the calendar. Use the Filter You can use the filter to find and view recordings based on criteria that you select. ¾¾ To use the filter to view your library: 1. Tap the Arlo icon on your mobile device.
View Your Content Turn Off the Filter The Filter icon on the Library page is solid green when you are using filtering. When filtering is used, only the recordings in your library that match your filter criteria display. You can turn off filtering. ¾¾ To turn off filtering for your library: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Library. 3.
3. Use an SD Card With Arlo Go All Arlo video recordings are stored to the cloud, but you can connect a Micro SD card to your Arlo Go camera and use the SD card as a second location to store Arlo Go recordings locally. Local storage on an SD card cannot be used on its own as a substitute for cloud recording. If you connect an SD card, the camera records to both the cloud and the SD card. If the camera is powered on but its LTE connection drops, the camera continues to record to the SD card.
Use an SD Card With Arlo Go Insert an SD Card ¾¾ To insert an SD card in an Arlo Go camera: 1. Unlock the battery compartment by pressing and holding the latch. 2. Gently pull the battery door back to open the compartment. 3. Insert the SD card into the SD card slot on the camera. SD card slot 4. Press the edge of the SD card until it is completely seated in the slot. 5. Close the battery door. 6. Reboot the Arlo Go camera. You must reboot the Arlo camera after installing an SD card.
Use an SD Card With Arlo Go The camera settings display. 4. In the Storage section, tap or click SD Card. The SD Card Status shows whether the SD card is ready, needs to be formatted, or is full. Turn SD Card Recording Off and On ¾¾ To turn SD card recording off and on: 1. Insert the SD card into the SD slot on the Arlo Go camera. For more information, see Insert an SD Card on page 23. 2. Tap the Arlo icon on your mobile device. If you are using a computer, enter arlo.netgear.
Use an SD Card With Arlo Go View Videos Saved on an SD Card To view videos saved on a local storage SD card, you must remove the SD card from your Arlo Go camera. Cloud recording is still enabled, but SD card recording is disabled as soon as you remove the SD card. To view the files on your SD card, you need an SD card reader, often called a memory card reader. Most computers do not come equipped with an SD card reader, but many inexpensive readers are available with standard USB or Micro USB connectors.
Use an SD Card With Arlo Go Change the SD Card Overwrite Setting By default, if the SD card fills up, the oldest recording is erased to make room for new recordings. You can change this setting if you want. ¾¾ To change the SD card overwrite setting: 1. Tap the Arlo icon on your mobile device. If you are using a computer, enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Settings > My Devices. A list of cameras displays. 3. Tap or click the camera.
Use an SD Card With Arlo Go The Devices page displays. 3. Tap or click Settings > My Devices. A list of cameras displays. 4. Tap or click the camera. The camera settings display. 5. In the Storage section, tap or click SD Card. The SD Card page displays. 6. Tap or click Format SD Card. The SD card is formatted. Safely Remove an SD Card It’s important to safely remove the SD card from your Arlo Go camera.
Use an SD Card With Arlo Go 7. Wait for the Unmounting SD Card progress message to close, then remove the SD card from your camera. WARNING: Do not interrupt power to the camera or remove the SD card while the SD card is being unmounted.
4. Personalize Your Camera You can customize Arlo Go settings such as the camera name to make it easier to manage. You can grant access to friends and set up cloud recording. Name Your Camera You can easily customize your Arlo Go camera by renaming it. ¾¾ To rename your Arlo Go camera: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Settings. The Settings page displays. 3. Tap or click My Devices.
Personalize Your Camera Change Your Password and User Name ¾¾ To change your password and user name: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Settings. The Settings page displays. 3. Under Account, tap or click Profile. The Profile page displays. 4. If you are using a smartphone, tap Edit at the top of the page. The Profile page displays. 5.
Personalize Your Camera The Profile page displays. 4. Tap Auto Login. Your settings are saved. Grant Access to Friends You can add friends to your Arlo account. Friends can view live streams from your cameras, record video clips, view, share, mark as favorite, and delete clips from your library. Friends are granted limited access to some of the settings and features of your Arlo account. You can select which cameras friends can see and what administrative rights are available to them.
Personalize Your Camera Edit a Friend’s Access Privileges ¾¾ To edit a friend’s access privileges: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Settings. 3. Under Account, tap or click Grant Access. A list of your friends displays with the status of their accounts. 4. Tap or click the friend, and Tap or click Edit . The Edit page displays. 5. Tap or click cameras to select or deselect them. 6.
Personalize Your Camera The Edit page displays. 5. Tap or click Delete Friend. 6. Tap or click Yes. The friend is deleted.
5. Modes, Rules, and Smart Alerts Modes let you use rules to set and control automated actions. With modes, Arlo Go can be on the lookout for you, even when you are not using the Arlo app. Arlo Go comes with the following modes: Armed. Detection is on for this camera. Disarmed . Detection is off for this camera. Schedule. Manage detection based on a schedule. If you add new modes, they are listed in the Arlo app with the Custom Mode icon .
Modes, Rules, and Smart Alerts 3. Tap or click the Arlo Go camera. The Mode page displays. 4. Tap or click a mode to activate it. The mode that you selected turns on immediately. The mode stays active until you change it. When you view the camera feeds, the icons that display at the top of each the camera feed are based on the currently selected mode. Motion. Motion detection is on. Sound. Audio detection is on. Change Motion Sensitivity You can easily change the sensitivity level for Arlo Go cameras.
Modes, Rules, and Smart Alerts 6. Under If the following, tap or click Edit next to Motion is detected. The Motion detection settings page displays. 7. Move the slider to adjust the sensitivity level for motion detection for this camera. If you used a mobile device to specify the settings, your settings are saved. 8. If you used a browser to specify the settings, click Save. Your settings are saved. Change Audio Sensitivity ¾¾ To change audio sensitivity for a camera: 1.
Modes, Rules, and Smart Alerts 8. If you used a browser to specify the settings, click Save. Your settings are saved. Manage Alerts Arlo can push notifications to your smartphone, send you email alerts, or do both. To receive Arlo notifications on your phone, you must get the Arlo app. Note: If you log out of the Arlo app on your smartphone or mobile device, you will stop receiving push notifications. ¾¾ To change the alert settings for a camera: 1. Tap the Arlo icon on your mobile device.
Modes, Rules, and Smart Alerts Create a Schedule You can set a schedule to activate and deactivate cameras automatically. Schedules recur weekly. For example, the schedule for Tuesday is repeated every Tuesday as long as the schedule is turned on. Arlo is preconfigured with the following schedule: • Monday through Friday, 8:00 a.m. to 5:00 p.m. All motion sensors are on. • All other times. All motion sensors are off. ¾¾ To set a schedule for a camera: 1. Tap the Arlo icon on your mobile device.
Modes, Rules, and Smart Alerts Add a Mode You can add new modes to tell your Arlo Go camera what to do in certain situations. For example, you can set your Arlo Go camera to record videos when the motion sensor is activated and to alert you with an email message. You can use the rules you create within modes and schedules to customize your Arlo Go camera. With Arlo Go cameras, you can create one rule for each mode. ¾¾ To add a mode for a camera: 1. Tap the Arlo icon on your mobile device.
Modes, Rules, and Smart Alerts You can use the sliders to adjust the sensitivity of the motion sensor: • Raise the sensitivity percentage to increase the number of videos that Arlo captures. • Lower the sensitivity percentage to decrease the number of videos that Arlo captures. Note: If you’re not sure what motion sensitivity to use, you can use the motion detection test after you finish creating the mode. For more information about the motion detection test, see 9.
Modes, Rules, and Smart Alerts Motion Detection Activity Zones You can identify zones within the camera view where you want the Arlo Go camera to detect motion. These zones are called activity zones. You can also select which activity zone or zones detect motion. Create an Activity Zone ¾¾ To create an activity zone: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Settings.
Modes, Rules, and Smart Alerts Select an Activity Zone for a Rule ¾¾ To select the activity zone where you want motion to be detected: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Mode. A list of cameras displays. 3. Tap or click the Arlo Go camera. A list of modes displays. 4. Tap or click the Edit icon next to the mode. The Edit Rule page displays. 5.
6. Settings You can view and change the Arlo Go settings. View Device Information ¾¾ To view device information: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Settings. The Settings page displays. 3. Tap or click My Devices. A list of cameras displays. 4. Tap or click the camera. The settings for the camera display. 5.
Settings The Devices page displays. 2. Tap or click Settings. The Settings page displays. 3. Tap or click My Devices. A list of cameras displays. 4. Tap or click the camera. The settings for the camera display. 5. Tap or click Status Light. Your settings are saved. Change the Time Zone ¾¾ To change the time zone: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Settings. The Settings page displays.
Settings Change the Video Resolution The default video resolution is 720p. You can change this setting to a higher or lower resolution. Decreasing the resolution of Arlo Go videos reduces the required WiFi bandwidth. ¾¾ To change the video resolution: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Settings. The Settings page displays. 3. Tap or click My Devices. A list of cameras displays. 4.
Settings The Devices page displays. 2. Tap or click Settings. The Settings page displays. 3. Tap or click My Devices. A list of cameras displays. 4. Tap or click the camera. The settings for the camera display. 5. Tap or click Video Settings. The Video Settings page displays. 6. Tap or click Night Vision.. Your settings are saved. Turn the Microphone Off and On ¾¾ To turn the microphone off and on: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.
Settings Change the Speaker Settings You can turn the speaker off and on and you can control the volume on your camera settings. ¾¾ To change the speaker setting: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Settings. The Settings page displays. 3. Tap or click My Devices. A list of cameras displays. 4. Tap or click the camera. 5. Tap or click Audio Settings. The Audio Settings page displays. 6.
Settings ¾¾ To change your power management settings: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Settings > My Devices. The My Devices page displays. 3. Select the camera whose power management settings you want to change. 4. Tap or click Video Settings. 5. Under POWER MANAGEMENT, select a power setting: • To extend your battery life, select Best Battery Life.
Settings The My Devices page displays. 3. Select the Arlo Go camera that you want to update. 4. Tap or click Device Info > Firmware > Update. WARNING: Do not disconnect your camera, open the battery door, or remove the battery while the firmware update is in progress. 5. Wait for the firmware update to complete. The camera’s LED blinks amber and blue while the firmware is downloading and installing. After the firmware is installed, the camera reboots and the LED is off.
Settings Restart the Camera ¾¾ To restart the camera: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Tap or click Settings. The Settings page displays. 3. Tap or click My Devices. A list of cameras displays. 4. Tap or click the camera. The settings for the camera display. 5. Scroll down and Tap or click Restart. The camera restarts.
6. Tap or click Yes. 7. Follow the onscreen instructions to display a QR code and to position it in front of the Arlo Go camera. 8. When the Arlo Go camera makes a chime sound, tap or click Yes. The camera resets to its factory settings and the camera feed no longer displays in your Arlo app. Remove a Camera From Your Account ¾¾ To remove a camera from your account: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays.
7. Manage Your Subscription Plan Every Arlo Go camera includes free Basic service that offers basic features and functionality. When activating your Arlo Go camera, you can choose between the Basic, Premier, and Elite service plans. Subscription Plans Upgrading to a paid service level gives you the ability to expand your Arlo Go camera to suit your specific needs. Depending on your service level, you can add cameras or cloud storage and share recordings with friends and family.
Manage Your Subscription Plan The Subscription Plan page displays. 5. To change to a Premier or Elite plan, tap or click SELECT. 6. Follow the onscreen instructions to change your subscription. After your payment is processed, Your service level information is updated on the Subscription page. Start or Stop a Continuos Video Recording Plan Continuous video recording, or CVR, is an optional feature available on Arlo Go cameras.
8. Arlo Connect Arlo Connect is a simple way to integrate Arlo devices into other smart home platforms using standard and secure cloud integration. Use Arlo With IFTTT You can use the Arlo app with IFTTT (If This Then That), a free cloud-based service that connects smart home devices and applications. To add Arlo to your IFTTT app, visit ifttt.com/arlo. To learn more about Arlo and IFTTT, visit arlo.com/community.
9. Use SmartThings With Arlo Cameras With Samsung SmartThings, you can integrate your Arlo cameras into the SmartThings app, so all your smart devices can work together. For example, if your Arlo camera detects motion, SmartThings tells your Aeon Labs Siren to trigger your alarm. Arlo camera feed integrated into the SmartThings app After you integrate your Arlo Wire-Free Cameras into the SmartThings app, you must use the SmartThings app to configure your modes and rules.
Use SmartThings With Arlo Cameras Disarm Your Cameras When you integrate your Arlo Wire-Free cameras with SmartThings, a new SmartThings mode is created in the Arlo app. Because SmartThings manages your Arlo cameras, they must be in Disarmed mode before you can begin the integration setup. You cannot use Schedule mode or Geofencing mode at the same time as SmartThings mode. You must also disable any IFTTT recipes that change the Arlo system mode. ¾¾ To disarm your cameras: 1.
Use SmartThings With Arlo Cameras 6. Tap Cameras > Netgear Arlo. 7. Tap Arlo (connect). 8. Tap Connect to Arlo. 9. Enter your Arlo login credentials 10. On the bottom of the page, accept the Privacy Policy. 11. Tap Done at the upper-right corner. 12. Tap Connect to Arlo Cameras and select the cameras that you want to sync with the SmartThings app. 13. Tap Done > Next > Done. 14. Tap My Home > Things. 15. To change your camera’s settings, tap the settings icon.
Use SmartThings With Arlo Cameras Adjust the Motion Sensitivity Level When you integrate Arlo into the SmartThings app, the motion sensitivity for each camera is set to a default of 80. If your camera works more effectively at a different setting, you can use the Arlo app to change it. ¾¾ To adjust the motion sensitivity level: 1. Tap the Arlo icon on your mobile device. If you are using a computer, enter arlo.netgear.com in the address bar of a browser. The Cameras page displays. 2. Tap or click Mode.
Adjust Push Notifications When you integrate Arlo with SmartThings, the Arlo app sends push notifications to the SmartThings app. Then the SmartThings app sends you notifications about Arlo and your other smart things. If you still receive push notifications from Arlo, on your smartphone, use your smartphone settings to turn off the Arlo notifications. Email notifications are not needed.
10. Troubleshooting Check Arlo Go’s LTE Signal Strength ¾¾ To check your Arlo Go’s LTE signal strength: 1. Tap the Arlo icon on your mobile device. You can also enter arlo.netgear.com in the address bar of a browser. The Devices page displays. 2. Find your Arlo Go camera. 3. Tap or click Settings. 4. Scroll down to the NETWORK section. AT&T signal strength displays in this section. 5.
Troubleshooting Arlo Go Is Not Streaming on a Mobile Device ¾¾ To troubleshoot problems with your Arlo Go video stream: 1. Make sure that your mobile device has good LTE signal strength. If your Arlo Go’s LEDs light amber and blink rapidly, your Arlo Go is in an LTE coverage area but can’t connect to the Arlo cloud. See Arlo Go has LTE service but can’t connect to the Arlo cloud on page 60.. If your Arlo Go’s LEDs light amber and blink slowly, the camera is outside of the LTE coverage area.
Troubleshooting Troubleshoot an Offline Arlo Go Camera ¾¾ To troubleshoot when your Arlo Go camera is offline: 1. Unplug your Arlo Go camera, remove the battery, reinsert the battery, and notice the camera LED behavior when the door is closed. • If the LED does not light, check to make sure that the battery is installed in the correct orientation and that the battery is not dead. If the battery is low or dead, plug in the camera or insert a fully charged battery.
Troubleshooting Note: If the LED blinks blue slowly during the startup process and then shows a different color briefly before it turns off, you might have the LED turned off in your settings. If your camera is still offline and you missed the behavior that the LED was showing right before it turned off, repeat steps 1 and 2 and pay close attention to the LED. 3. If your camera is still offline, visit Arlo Support to speak with an expert.
Troubleshooting Check the Arlo App Settings on an iOS Device Make sure that you allow the Arlo app to receive push notifications. The Arlo app push notifications can be disabled on iOS and Android devices. ¾¾ To allow Arlo push notifications on iOS devices: 1. Tap the Settings icon for your iOs device. 2. Select Notifications > Arlo.. The Arlo notification settings display. 3. Make sure that Allow Notification is selected.
11. Rechargeable Battery Safety Safety Rules for Arlo Go Rechargeable Batteries Arlo Go Wire-Free HD Security Cameras use rechargeable batteries and can go wherever you need them. But ALL batteries can EXPLODE, CATCH FIRE, and CAUSE BURNS if disassembled, punctured, cut, crushed, short-circuited, incinerated, or exposed to water, fire, or high temperatures, so you need to handle them with care.
Rechargeable Battery Safety Safety Rules for Arlo Go Charging Station The Arlo Go Charging Station is sold separately. You can use the charging station to charge one or two Arlo Go rechargeable batteries. For more information about the Arlo Go Charging Station, see the instructions that are included in the Arlo Go Charging Station package.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 24cm between the radiator & your body. Industry Canada statement: This device complies with ISED’s licence‐exempt RSSs.
