User's Manual
Table Of Contents
- AC1200 WiF Range Extender
- Table of Contents
- 1. Overview
- Meet Your Extender
- 2. Get Started
- Install the WiFi Extender
- 3. Extender Network Settings
- View Connected Devices
- Boost Your Video Streaming with FastLane Technology
- View WiFi Settings
- Change the WiFi Network Name
- Turn Off the SSID Broadcast to Create a Hidden Network
- Disable or Enable the WiFi Radios
- Change the WiFi Speed
- Use WPS to Add a Computer to the Extender’s WiFi Network
- Deny Access to a Computer or WiFi Device
- Set Up an Access Schedule
- Change the Extender’s Device Name
- Set Up the Extender to Use a Static IP Address
- Use the Extender with MAC Filtering or Access Control
- 4. Maintain and Monitor the Extender
- Change the Extender User Name and Password
- Turn Password Protection Off and On
- 5. FAQs and Troubleshooting
- FAQs
- A. Factory Settings and Technical Specifications
- Factory Default Settings
- Technical and Environmental Specifications
Extender Network Settings
34
AC1200 WiF Range Extender
For example, if the binary code is 1100/0110, the new hexadecimal value is C6.
Binary
numbers
Hexadecimal
values
Binary
numbers
Hexadecimal
values
0000 0 1000 8
0001 1 1001 9
0010 2 1010 A
0011 3 1011 B
0100 4 1100 C
0101 5 1101 D
0110 6 1110 E
0111 7 1111 F
d. Replace the first two hexadecimal values in the old MAC 1 address with the new
value that you converted and add the new MAC 1 address to your router’s MAC filter
table.
For example, if your old MAC 1 address was C4:04:15:5F:20:AD, your new MAC 1
address is C6:04:15:5F:20:AD.
13. Enable the router
’s MAC filter, wireless access control, or ACL.