AC1200 WiF Range Extender Model E X6150 User Manual September 2015 202-11410-02 350 East Plumeria Drive San Jose, CA 95134 USA
AC1200 WiF Range Extender Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources. Conformity For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621. Compliance For regulatory compliance information, visit http://www.netgear.com/about/regulatory.
Table of Contents Chapter 1 Overview Meet Your Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front and Side Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . When to Use Your Extender. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How the Extender Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AC1200 WiF Range Extender Manually Set the Extender Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Up and Manage the Extender Configuration . . . . . . . . . . . . . . . . . . . . . . . . Back Up the Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Restore the Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Return the Extender to Its Factory Default Settings . . . . . . . . . . .
1. 1 Overview The WiFi Range Extender boosts your existing network range and speed, delivering dual-band WiFi. You can also use the extender in access point mode as a WiFi access point and create a new WiFi hotspot by using a wired Ethernet connection. This chapter covers the following topics: • Meet Your Extender • When to Use Your Extender • How the Extender Works Note: For more information about the topics covered in this manual, visit the support website at support.netgear.com.
AC1200 WiF Range Extender Meet Your Extender Before you install your extender, familiarize yourself with its LEDs, buttons, and port. Front and Side Panels Client Arrow LED Router Link LED Router Arrow LED Client Link LED Access Point/Extender switch Power On/Off button WPS button Factory Reset button Power LED WPS LED Ethernet port Figure 1. Front and side panels The following table describes the LEDs. Table 1.
AC1200 WiF Range Extender Table 1. LEDs LED Description Power • • • Solid amber. The extender is booting. Solid green. The extender is powered on. Off. The extender is powered off. WPS • • • Solid green. WiFi security is enabled (WPA or WPA2). Blinking green. A WPS connection is in progress. Off. WiFi security is not enabled Note: If the Router Arrow LED or Client Arrow LED blinks, see Find the Best Location on page 13. If no arrow LEDs light, the extender is in a good location.
AC1200 WiF Range Extender WiFi Range Extender Existing WiFi Boosts the range of your existing WiFi and creates a stronger signal in hard-to-reach areas Sometimes your router does not provide the WiFi coverage that you need Figure 2.
2.
AC1200 WiF Range Extender Install the WiFi Extender Place the extender, apply power, and connect it to your WiFi network. Note: You can also use the extender as a WiFi access point and create a new WiFi hotspot by using a wired Ethernet connection. See Use the Extender in Access Point Mode on page 14. Place the Extender and Apply Power To place the extender and apply power: 1. Place your extender in the same room as your WiFi router.
AC1200 WiF Range Extender 2. Within two minutes, press the WPS button on your router or access point. The WPS LED on the extender lights solid green, the Router Link LED lights, and the extender connects to your existing WiFi network. If the Router Link LED does not light, try again. If it still does not light, see Connect with Web Browser Setup on page 11. 3. If your WiFi router supports the 5 GHz band, repeat Steps 1 and 2 to connect the extender to the 5 GHz band. 4.
AC1200 WiF Range Extender 4. Click the NEW EXTENDER SETUP button. The first time that you log in to the extender, the Create Account screen displays. If the Create Account screen does not display, visit www.mywifiext.net. 5. Complete the fields on the Create Account screen and click the NEXT button. 6. When prompted, select your country or region from the Regional Settings menu and click the NEXT button. 7. Click the WIFI RANGE EXTENDER button.
AC1200 WiF Range Extender 12. Make sure that your client device is successfully connected before you click the Continue button. 13. Click the Continue button. A message displays confirming that the extender is connected to the new extender WiFi network. 14. Click the Next button. The registration screen displays. 15. Complete the registration fields and click the Finish button to complete the setup. If you do not want to register your extender, click the Skip Registration link.
AC1200 WiF Range Extender Connect an Ethernet-Enabled Device After the extender is connected to your existing WiFi network, you can connect a wired device to the extender using an Ethernet cable. The device can then access your existing network through the extender’s WiFi connection. Figure 3. Connect a device to the Ethernet LAN port Use the Extender in Access Point Mode You can use the extender as a WiFi access point, which creates a new WiFi hotspot by using a wired Ethernet connection. Figure 4.
AC1200 WiF Range Extender To use the extender in access point mode: 1. Plug the extender into an electrical outlet. 2. Wait for the Power LED to light amber and then turn green. If the Power LED does not light, press the Power On/Off button on the side of the extender. 3. Use an Ethernet cable to connect the Ethernet port on the extender to a router Ethernet LAN port or a remote Ethernet LAN jack with LAN access. The extender joins the LAN and creates a WiFi hotspot. 4.
AC1200 WiF Range Extender 8. When prompted, select your country or region from the Regional Settings menu and click the NEXT button. 9. Click the ACCESS POINT button. The extender checks for an Internet connection. 10. Click the HOME NETWORK or PUBLIC NETWORK button. 11. When prompted, set the network name (SSID), security option, and password, and click the NEXT button. Your settings are applied and the extender is ready to be used as an access point. 12.
AC1200 WiF Range Extender A login screen displays. 4. Enter your email address and password and click the LOG IN button. The Status screen displays. Run Smart Setup Installation You can use Smart Setup to change the extender settings. This is an easy way to connect the extender to a different router or to change the extender WiFi network name (SSID) or WiFi password. To run Smart Setup: 1. Use a WiFi network manager on a computer or WiFi device to find and connect to the new extender WiFi network.
AC1200 WiF Range Extender If you do not want to register your extender, click the Skip Registration link. Note that you must register your extender before you can use NETGEAR telephone support. The Status screen displays.
3.
AC1200 WiF Range Extender View Connected Devices You can view a list of devices that are connected to the extender network. To view connected devices: 1. On a computer or WiFi device that is connected to the extender network, launch a web browser. 2. In the address field of your browser, enter www.mywifiext.net. 3. When prompted, enter your email address and password. 4. Click the Menu icon . The extender menu displays. 5. Select Settings > Connected Devices.
AC1200 WiF Range Extender When you enable FastLane Technology, two options are available: • Use the 2.4 GHz band to connect the extender to the WiFi devices and use the 5 GHz band to connect the extender to the WiFi router. Use this mode if your WiFi router supports the 5 GHz band but the devices that you want to use for gaming and streaming support the 2.4 GHz band. • Use the 5 GHz band to connect the extender to the WiFi devices and use the 2.4 GHz band to connect the extender to the WiFi router.
AC1200 WiF Range Extender View WiFi Settings To view the WiFi settings: 1. On a computer or WiFi device that is connected to the extender network, launch a web browser. 2. In the address field of your browser, enter www.mywifiext.net. 3. When prompted, enter your email address and password. 4. Click the Menu icon . The extender menu displays. 5. Select Settings > WiFi. Change the WiFi Network Name To change the WiFi network name: 1.
AC1200 WiF Range Extender 5. Select Settings > WiFi. 6. In each Network Name (SSID) field, type a network name. 7. Click the SAVE button. Your settings are saved. Turn Off the SSID Broadcast to Create a Hidden Network By default, the extender broadcasts its WiFi signal so that its wireless network names (SSIDs) are easy for you to find and connect to from your computer, tablet, or smartphone. You can turn off the SSID broadcast to create a hidden WiFi network.
AC1200 WiF Range Extender 5. Select Settings > WiFi. 6. Clear the Broadcast the Network name (SSID) check box. 7. Click the SAVE button. Your settings are saved. Disable or Enable the WiFi Radios By default, the extender’s WiFi radios broadcast signals in the 2.4 GHz and 5 GHz bands. If you disable the WiFi radios, then no one can connect with WiFi to the extender. To disable or enable the WiFi radios: 1. On a computer or WiFi device that is connected to the extender network, launch a web browser. 2.
AC1200 WiF Range Extender 5. Select Settings > WiFi. 6. Select or clear the Enable 2.4 GHz WiFi check box. 7. Select or clear the Enable 5 GHz WiFi check box. 8. Click the SAVE button. Your settings are saved. Change the WiFi Speed To change the WiFi speed: 1. On a computer or WiFi device that is connected to the extender network, launch a web browser. 2. In the address field of your browser, enter www.mywifiext.net. 3. When prompted, enter your email address and password. 4. Click the Menu icon .
AC1200 WiF Range Extender 5. Select Settings > WiFi. 6. In each WiFi Speed menu, select a speed. 7. Click the SAVE button. Your settings are saved. Use WPS to Add a Computer to the Extender’s WiFi Network WPS (WiFi Protected Setup) lets you connect a computer or WiFi device to the extender’s network without entering the WiFi network passphrase or key. Instead, you use a WPS button or enter a PIN to connect.
AC1200 WiF Range Extender Use WPS with the Push Button Method To use the button method to connect a WiFi device to the extender’s WiFi network, the WiFi device that you are trying to connect must include a physical WPS button or display an onscreen WPS button that you can click. To use WPS to add a computer or WiFi device to the extender’s WiFi network: 1. On a computer or WiFi device that is connected to the extender network, launch a web browser. 2. In the address field of your browser, enter www.
AC1200 WiF Range Extender 3. When prompted, enter your email address and password. 4. Click the Menu icon . The extender menu displays. 5. Select Settings > Do More > Connect Devices (WPS). The Connect Devices (WPS) screen displays. 6. Select the PIN Number radio button. 7. Type the PIN of the WiFi device in the field. 8. Click the NEXT button. For four minutes, the extender attempts to find the computer or WiFi device. 9.
AC1200 WiF Range Extender 2. In the address field of your browser, enter www.mywifiext.net. 3. When prompted, enter your email address and password. 4. Click the Menu icon . The extender menu displays. 5. Select Settings > Connected Devices. 6. In the WiFi Devices section, select the Enable Access Control check box. The WiFi devices table displays the name and MAC address of WiFi devices that are connected to the extender. 7. Select the Deny check box for the device. 8. Click the SAVE button.
AC1200 WiF Range Extender 4. Click the Menu icon . The extender menu displays. 5. Select Do More > Access Schedule. 6. Select the Access Schedule On radio button. The screen adjusts. 7. In the Days menu and the Time menu, select the days and time when you want to disable Internet access. 8. Click the Add Time button to add the time that you specified to the Scheduled Times table. 9. Click the SAVE button. Your settings are saved. Change the Extender’s Device Name The default name is EX6150.
AC1200 WiF Range Extender 6. Scroll down and click the IP address settings. 7. In the Device Name field, type a name. 8. Click the SAVE button. Your settings are saved. Set Up the Extender to Use a Static IP Address The extender comes set up to use a dynamic IP address, which is the correct setting for most home networks. To set up the extender to use a static IP address: 1. On a computer or WiFi device that is connected to the extender network, launch a web browser. 2.
AC1200 WiF Range Extender 6. Scroll down and click the IP Address heading. By default, the Dynamically get IP Address from Router radio button is selected. 7. Select the Use Static IP Address radio button. 8. Complete the fields to specify the IP network IP addresses. 9. Click the SAVE button. Your settings are saved.
AC1200 WiF Range Extender The extender menu displays. 6. Select Settings > WiFi Settings. The WiFi Settings screen displays. 7. Scroll down and select Connected Devices. The Connected Devices section displays the MAC addresses and virtual MAC addresses for computer and WiFi devices that are connected to the extender network. 8. On the router, add all of the virtual MAC addresses from your extender to your router’s MAC filter table. 9.
AC1200 WiF Range Extender For example, if the binary code is 1100/0110, the new hexadecimal value is C6. Binary numbers Hexadecimal values Binary numbers Hexadecimal values 0000 0 1000 8 0001 1 1001 9 0010 2 1010 A 0011 3 1011 B 0100 4 1100 C 0101 5 1101 D 0110 6 1110 E 0111 7 1111 F d. Replace the first two hexadecimal values in the old MAC 1 address with the new value that you converted and add the new MAC 1 address to your router’s MAC filter table.
4.
AC1200 WiF Range Extender Change the Extender User Name and Password You can change the user name and password to log in to the extender. To add an extender user: 1. On a computer or WiFi device that is connected to the extender network, launch a web browser. 2. In the address field of your browser, enter www.mywifiext.net. 3. When prompted, enter your email address and password. 4. Click the Menu icon . The extender menu displays. 5. Select Settings > Password Settings. 6.
AC1200 WiF Range Extender Turn Password Protection Off and On NETGEAR recommends that you leave password protection on to help keep your network secure. You can turn password protection off and on. To turn password protection off or on: 1. On a computer or WiFi device that is connected to the extender network, launch a web browser. 2. In the address field of your browser, enter www.mywifiext.net. 3. When prompted, enter your email address and password. 4. Click the Menu icon .
AC1200 WiF Range Extender A login screen displays. 7. Log in to the extender. Automatically Adjust for Daylight Saving Time To set up the extender to automatically adjust for daylight saving time: 1. On a computer or WiFi device that is connected to the extender network, launch a web browser. 2. In the address field of your browser, enter www.mywifiext.net. 3. When prompted, enter your email address and password. 4. Click the Menu icon . The extender menu displays. 5.
AC1200 WiF Range Extender Back Up and Manage the Extender Configuration When the extender works correctly after initial setup, NETGEAR recommends that you back up the extender configuration settings. After you have back up the settings, if you change the extender configuration settings but are not content with the new settings, you can restore the extender configuration to the backed-up settings. Back Up the Configuration Settings You can back up the configuration file of the extender.
AC1200 WiF Range Extender 3. When prompted, enter your email address and password. 4. Click the Menu icon . The extender menu displays. 5. Select Settings > Other Settings. 6. Click the BROWSE button. 7. Locate and select the previously saved backup file. By default, the name of the backup file is NETGEAR_EX7000.cfg. CAUTION: After you click the RESTORE button, do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting! 8.
AC1200 WiF Range Extender To use the Factory Reset button to return the extender to factory default settings: CAUTION: This process erases any settings that you configured in the extender. 1. Insert a straightened paper clip into the hole of the Factory Reset button and hold it for about seven seconds. Factory Reset button 2. Release the button.
AC1200 WiF Range Extender The extender menu displays. 5. Select Settings > Other Settings. CAUTION: After you click the RESET button, do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting! 6. Click the RESET button. A confirmation pop-up screen displays. 7. Confirm your decision. The extender returns to its factory settings and restarts. This process takes about one minute.
AC1200 WiF Range Extender 5. Select Settings > Firmware Update. 6. Click the CHECK ONLINE button. 7. If new firmware is available, follow the onscreen prompts to download it onto your computer. Note: You might need to unzip the firmware file. 8. Click the BROWSE button. 9. Locate and select the new firmware file. The firmware file name ends with a .chk extension.
AC1200 WiF Range Extender The Other Settings screen displays. 6. Click the RESTART button and click the Yes button to confirm. The extender restarts, which takes about two minutes.
5.
AC1200 WiF Range Extender FAQs This section provides answers for difficulties you might experience with the extender. The web browser setup keeps asking me for my network password (passphrase) or security key, and I am sure that I entered the correct password. What can I do? The extender is probably placed at the borderline of the range covered by the router or access point. For more information about where the place the extender, see Find the Best Location on page 13.
AC1200 WiF Range Extender • It is possible that you typed the network name, passphrase, or key incorrectly. Use Smart Setup (see Run Smart Setup Installation on page 17) to select a WiFi network and retype the passphrase or key. The passphrase or key is case-sensitive. For example, PASSWORD25 is not the same as Password25 or password25. • If the extender cannot detect your WiFi network, check to see if your WiFi network is still working. Make sure that the WiFi router is turned on.
A.
AC1200 WiF Range Extender Factory Default Settings To reset the extender to factory default settings, you can use either the Factory Reset button on the rear panel or log in to and click the RESET button. For more information, see Return the Extender to Its Factory Default Settings on page 40. The following table shows the factory default settings. Table 2.
AC1200 WiF Range Extender Technical and Environmental Specifications The following table shows the technical and environmental specifications. Table 3. Technical specifications Technical Specifications Network protocol and standards compatibility Data and routing protocols: TCP/IP, DHCP server and client, NAT (many-to-one). Physical specifications • • Dimensions: 122 x 74 x 38 mm (4.8 x 2.91 x 1.5 in.) Weight: 294 g (0.
