User's Manual

8. Click Apply.

Your changes are saved.

9. When you are ﬁnished with the wireless settings, disconnect the

Ethernet cable from the PowerLEAP.

Now you can connect your wireless devices to the PowerLEAP access

point. See Connect to the PowerLEAP Access Point on page 14.

¾ To set up WiFi access using the browser setup guide:

1. On your computer or wireless device (tablet, smartphone), open

the soware that manages your wireless network connections and

connect to the PowerLEAP network.

Note: The default network key (wireless security password) and the

default wireless name (SSID) for 2.4GHz operation are printed on the

product label. The SSID format is NETGEARxx_EXT at 2.4GHz and

NETGEARxx-5G_EXT at 5GHz.

2. On the same computer or wireless device, open a web browser

window.

The browser takes you directly to the onscreen setup guide. If it does

not, enter one of the following into the browser address bar: