User's Manual
Table Of Contents
- D2200D-1FRNAS_UM_draft_11may2015.pdf
- ADSL2+ Gateway
- Contents
- 1. Hardware Setup
- 2. Connect to the Network and Access the Gateway
- 3. Specify Your Internet Settings
- 4. Control Access to the Internet
- 5. Specify Network Settings
- View Network Computers and Devices
- Specify the IP Addresses that the Gateway Assigns
- Disable the DHCP Server Feature in the Gateway
- Improve Network Connections with Universal Plug and Play
- Specify Basic WiFi Settings
- Change the WiFi Security Settings
- Create a Hidden Wireless Network
- Restrict Wireless Access by MAC Address
- Set Up a Guest Network
- WPS Overview
- Control the Wireless Radios
- Quality of Service
- Change the Wireless Mode
- 6. Manage Your Network
- Change the admin Password
- View Gateway Status
- View Advanced Status
- Upgrade the Firmware
- Run the Ping Utility
- Run the Traceroute Utility
- View Devices Currently on the Network
- Manage the Gateway Configuration File
- Restore the Factory Settings
- Dynamic DNS
- Specify the Date and Time Settings
- Reboot the Gateway
- Specify the VPN Pass-Through Method
- A. Supplemental Information
- B. Wall-Mount the Gateway
- FCC statement.pdf
Hardware Setup
10
ADSL2+ Gateway
Cable Your Gateway
The gateway comes configured to work as both a modem and a router. You can share your
Internet connection without connecting the gateway to a router or gateway.
To cable your gateway:
1. Connect the phone line cable that came in the package to the DSL port.
PowerPowerDSL port
adapter
input
On/Of
button
2. Connect the other end of the phone line cable to your DSL line wall jack.
3. Connect the power adapter provided in the package to the gateway and plug the power
adapter in to an electrical outlet.
4. Press the Power On/Off button.
The Power LED lights green.
To set up your Internet connection, you must connect a computer or wireless device to the
gateway’
s network and use a web browser
. See Connect to the Network on page 12 and
Chapter 3, Specify Your Internet Settings.
DRAFT