User's Manual
Table Of Contents
- MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
- Contents
- 1. Hardware Setup
- 2. Get Started with NETGEAR genie
- 3. Connections Setup
- 4. Maintenance
- 5. Advanced Settings
- 6. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Maintenance
37
MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
3. To make sure that all of the attached devices are authorized, examine the devices carefully.
To increase security, enable access control. For more information, see Set Up a Wireless
Card Access List on page 47.
4. (Optional) Click the Refresh button.
The information that is displayed is updated.
Manage the Configuration File
The configuration settings of the WiFi bridge/extender are stored within the WiFi
bridge/extender in a configuration file. You can back up (save) this file to your computer,
restore it, or reset it to the factory default settings.
Back Up Settings
To back up the WiFi bridge/extender’s configuration settings:
1. Log in to the WiFi bridge/extender.
For more information, see Use NETGEAR genie after Installation on page 16.
2. Select Maintenance > Backup Settings.