User's Manual
Table Of Contents
- MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
- Contents
- 1. Hardware Setup
- 2. Get Started with NETGEAR genie
- 3. Connections Setup
- 4. Maintenance
- 5. Advanced Settings
- 6. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Maintenance
35
MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
3. To display traffic statistics, click the Show Statistics button.
The following information displays:
• System Up Time
. The time elapsed since the WiFi bridge/extender was last
restarted.
• Port. The statistics for the WAN (Internet) port, the four LAN (Ethernet) ports
combined, and the wireless LAN (WLAN) port.
• Status
. The link status of the port.
• TxPkts
. The number of packets transmitted on this port since reset or manual clear
.
• RxPkts. The number of packets received on this port since reset or manual clear
.
• Collisions. The number of collisions on this port since reset or manual clear
.
• Tx B/s. The current transmission (outbound) bandwidth that is used on the port.
• Rx B/s. The current reception (inbound) bandwidth that is used on the port.
• Up Time.
The time elapsed since this port acquired the link.
• Poll Interval. The interval at which the statistics are updated on this screen.
4. To change the polling frequency, enter a time in seconds in the Poll Interval field, and click
the Set Interval button.
5. To stop the polling entirely, click the Stop button.