User's Manual
Table Of Contents
- MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
- Contents
- 1. Hardware Setup
- 2. Get Started with NETGEAR genie
- 3. Connections Setup
- 4. Maintenance
- 5. Advanced Settings
- 6. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Maintenance
33
MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
WiFi Bridge/Extender Status
View information about the WiFi bridge/extender, the Internet port, and the wireless settings
(this screen is referred to as the Status screen):
To view WiFi bridge/extender status and statistics information and change the polling
frequency:
1. Log in to the WiFi bridge/extender.
For more information, see Use NETGEAR genie after Installation on page 16.
2. Click Maintenance > Status.
The following information displays:
• Hardware Version
. The WiFi bridge/extender model.
• Firmware Version. The version of the WiFi bridge/extender firmware. It changes if
you upgrade the WiFi bridge/extender firmware.
• GUI Language Version.
The localized language of the WiFi bridge/extender user
interface.
• Extender IP Info: