User's Manual
Table Of Contents
- MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
- Contents
- 1. Hardware Setup
- 2. Get Started with NETGEAR genie
- 3. Connections Setup
- 4. Maintenance
- 5. Advanced Settings
- 6. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Connections Setup
30
MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
Coax Settings
You can view or change the coax settings.
To view or change the coax settings:
1. Log in to the WiFi bridge/extender.
For more information, see Use NETGEAR genie after Installation on page 16.
2. Select Setup > Coax Settings.
3. From the Channel list, select the channel that you want to use.
4. To enable the encryption key, in the Encryption key section, select the Enable radio button.
If the encryption key feature is enabled, the key used by the WiFi bridge/extender and
cable MoCA gateway must match.