User's Manual

Connections Setup
28
MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
6. Depending on the authentication type, generate the key automatically or enter it manually:
• If the authentication type is Automatic:
a. In the Passphrase field, enter a passphrase:
b. Click the Generate button.
For 64-bit WEP, four different WEP keys are generated. For 128-bit WEP, only
one WEP key is generated, and the four key fields are populated with the same
WEP key
.
• If the authentication type is Shared Key:
a. Specify the active key by selecting the Key 1, Key 2, Key 3, or Key 4 radio
button.
b. Enter the value for the key manually:
- For 64-bit WEP
, enter 10 hexadecimal digits (any combination of 0–9, A–F).
The key values are not case-sensitive.
- For 128-bit WEP
, enter 26 hexadecimal digits (any combination of 0–9, A–F).
The key values are not case-sensitive.
7. Click the Apply button.
IP Address Setup
You can view or change ISP information. The default settings usually work fine.
 To view or change the IP address setup:
1. Log in to the WiFi bridge/extender.
For more information, see Use NETGEAR genie after Installation on page 16.