User's Manual
Table Of Contents
- MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
- Contents
- 1. Hardware Setup
- 2. Get Started with NETGEAR genie
- 3. Connections Setup
- 4. Maintenance
- 5. Advanced Settings
- 6. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Hardware Setup
11
MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
1. Place your router near the center of the area where your computers and other devices
operate, and within line of sight to your wireless devices.
2. Make sure that the router is within reach of an
AC power outlet and near Ethernet cables for
wired computers.
3. Place the router in an elevated location, minimizing the number walls and ceilings between
the router and your other devices.
4. Place the router away from electrical devices such as these:
• Ceiling fans
• Home security systems
• Microwaves
• Computers
• •Base of a cordless phone
• 2.4 GHz cordless phone
5. Place the router away from large metal surfaces, large glass surfaces, and insulated walls
such as these:
• Solid metal door
• Aluminum studs
• Fish tanks
• Mirrors
• Brick
• Concrete
Cable Your WiFi Bridge/Extender
The installation guide that came in the box has a cabling diagram on the first page. This
section describes how to connect the WiFi bridge/extender, the computer, and the cable
broadband modem, and provides detailed illustrations.