User's Manual

9
NETGEAR genie displays.
5. Verify that the Access Point/Extender switch is set to Extender and
click the CONTINUE button.
6. Select a WiFi network to extend and click the NEXT button.
If you do not want to extend both WiFi bands, clear the 2.4GHz WiFi
Networks or the 5GHz WiFi Networks checkbox.
7. Type the existing WiFi network password (also called passphrase or
security key) in the Password (network key) field and click the
NEXT button.
8. Set the network name (SSID) and password for your new extender
WiFi network and click the NEXT button.
9. Use a WiFi network manager on the computer or WiFi device to
connect to the new extended WiFi network.
Repeat this step for all of your computers and WiFi devices.
10. Select the check box at the bottom of the screen and click the NEXT
button.
A message displays confirming that the extender has connected to
the WiFi network.
11. Click the Next button.
The reregistration screen displays.