User's Manual

13
Use the Extender in Access Point Mode
You can use the extender as a WiFi access point, which creates a new WiFi
hotspot by using a wired Ethernet connection.
1. Set the Access Point/Extender switch to Access Point .
2. Plug the extender into an electrical outlet.
The Power LED lights green within one minute. If the Power
LED does not light, press the Power On/Off button.
3. Use an Ethernet cable to connect the extender to the router Ethernet
LAN port or the remote Ethernet LAN jack with LAN access.
The extender joins the LAN and creates a WiFi hotspot.