User's Manual
12
2. Connect the extender to an existing WiFi network.
For more information, see Connect to an Existing WiFi Network on
page 6
.
3. Plug the Ethernet cable from an Ethernet-enabled device in to the
Ethernet port on the extender.
Install the Extender as an Access Point
You can use the extender as a WiFi access point, which creates a new WiFi
hotspot within your local network.
1. Place your extender in the same room as your WiFi router.
Proximity to the WiFi router is required only during the initial setup
process.
2. Plug the extender into an electrical outlet.
The Power LED lights green. If the Power LED does not light,
press the Power button.
3. Use a WiFi network manager on a computer or mobile device to find
and connect to the NETGEAR_EXT (SSID) WiFi network.
Aer the connection with the computer or mobile device is
established, the Client Link LED lights.