User's Manual
Table Of Contents
- N300 Wireless Router
- Contents
- 1. Hardware Setup
- 2. Connect to the Network and Access the Router
- 3. Specify Your Internet Settings
- 4. Networking
- View or Change WAN Settings
- Set Up a Default DMZ Server
- Change the Router’s Device Name
- Change the LAN TCP/IP Settings
- Specify the IP Addresses that the Router Assigns
- Disable the DHCP Server Feature in the Router
- Reserve LAN IP Addresses
- Use the WPS Wizard for WiFi Connections
- Specify Basic WiFi Settings
- Change the WiFi Security Option
- Set Up a Guest Network
- Control the Wireless Radio
- Set Up a Wireless Schedule
- Set up a Wireless Access List
- Specify WPS Settings
- Wireless Distribution System
- Static Routes
- View Devices Currently on the Network
- Improve Network Connections with Universal Plug and Play
- 5. Manage Your Network
- 6. Troubleshooting
- A. Supplemental Information
Manage Your Network
59
N300 Wireless Router
PPPoE Connection
The Connect and Disconnect buttons in the Connection Status screen display only when
the connection mode is Manually Connect.
The following information displays for a PPPoE connection:
• Connection Time. The time that elapsed since the connection was established.
• Connection Status. The status of the connection: Connected, Disconnected, Negotiation
(---, Success), or Authentication (---, Success). --- indicates failure.
• IP Address. The IP address that is assigned to the router.
• Subnet Mask. The subnet mask that is assigned to the router.
To change the router PPPoE connection settings:
1. To establish the PPPoE connection manually, click the Connect button.
2. To terminate the PPPoE connection manually, click the Disconnect button.
3. To close the Connection Status screen, click the Close Window button.
PPTP Connection
The content of the Connection Status pop-up screen depends on the type of connection. The
Connect and Disconnect buttons in the Connection Status screen display only when the
connection mode is Manually Connect.
The following information displays for a PPTP connection:
• Connection Status. The status of the connection: Connected or Disconnected.
• IP Address. The IP address that is assigned to the router.
• Subnet Mask. The subnet mask that is assigned to the router.
To change the router PPTP connection settings:
1. To establish the PPTP connection manually, click the Connect button.
2. To terminate the PPTP connection manually, click the Disconnect button.
3. To close the Connection Status screen, click the Close Window button.
View Wireless Settings
To view the wireless settings:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.