User's Manual
Table Of Contents
- N300 Wireless Router
- Contents
- 1. Hardware Setup
- 2. Connect to the Network and Access the Router
- 3. Specify Initial Settings
- 4. Optimize Performance
- 5. Control Access to the Internet
- 6. Specify Network Settings
- Set Up a Default DMZ Server
- Change the Router’s Device Name
- Change the LAN TCP/IP Settings
- Specify the IP Addresses That the Router Assigns
- Reserve LAN IP Addresses
- Use the WPS Wizard for WiFi Connections
- Specify Basic WiFi Settings
- Set Up a WiFi Guest Network
- Control the Wireless Radio
- Set Up a WiFi Schedule
- Specify WPS Settings
- Dynamic DNS
- 7. Manage Your Network
- 8. Specify Internet Port Settings
- 9. Troubleshooting
- A. Supplemental Information
Optimize Performance
39
N300 Wireless Router
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password.
The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > QoS Setup.
5. Select the By Service radio button.
6. In the QoS rules table, click the application or service to select it.
7. Click the
Edit button.
The QoS - Priority Rules screen displays.
8. In the Priority list, select a priority level.
9. Click the Apply button.
The rule’s priority is updated in the QoS rules table on the QoS Setup screen.
Delete a QoS Rule
To delete a QoS rule:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. In the address field of the web browser
, enter http://www.routerlogin.net or
http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin
.
The default password is password.
The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > QoS Setup.
5. Select the By Service radio button.
6. In the QoS rules table, click the application or service to select it.
7. Click the
Delete button.
The rule is deleted.
DRAFT