User's Manual

genie BASIC Settings
31
A750 Wireless Dual Band Gigabit Router R6050
2. Select BASIC > Wireless Settings.
3. In the Security Options section, select the WEP radio button.
4. In the Authentication Type list, select one of the following types:
• Automatic. If you enter a password in the Passphrase field and click the Generate
button, the four keys are automatically generated.
• Shared Key. If you select this option, you must select one key and enter the value
manually
.
5. In the Encryption Strength list, select the encryption key size:
• 64-bit. Standard WEP encryption, using 40/64-bit encryption.
• 128-bit. Standard WEP encryption, using 104/128-bit encryption.
This selection
provides higher encryption security.
6. Depending on the authentication type, generate the key automatically or enter it manually:
• If the authentication type is Automatic, do the following
a. In the Passphrase field, enter a password.
b. Click the Generate button.
For 64-bit WEP, four different WEP keys are generated. For 128-bit WEP, only
one WEP key is generated, and the four key fields are populated with the same
WEP key
.
• If the authentication type is Shared Key, do the following
a. Specify the active key by selecting the Key 1, Key 2, Key 3, or Key 4 radio
button.
b. Enter the value for the key manually:
- For 64-bit WEP, enter 10 hexadecimal digits (any combination of 0–9, A–F).
The key values are not case-sensitive.
- For 128-bit WEP
, enter 26 hexadecimal digits (any combination of 0–9, A–F).
The key values are not case-sensitive.