User's Manual

genie BASIC Settings

A750 Wireless Dual Band Gigabit Router R6050

¾ To configure WPA/WPA2 Enterprise security:

1. Log in to the router.

For more information, see Use NETGEAR genie after Installation on page 17.

2. Select BASIC > W

ireless Settings.

3. In the Security Options section, select the WP

A/WPA2 Enterprise radio button.

4. Select the WPA mode (WPA [TKIP], WPA2 [AES], or WPA [TKIP] + WPA2 [AES]).

5. T

ype the IP address of the RADIUS server.

The address can be on your LAN or it can be an external address.

6. Enter the port number for the RADIUS server in the range from 1 to 65535.

The default number is 1812.

7. T

ype the shared secret, which must be from 1 through 128 characters (the default value

is blank).

The shared secret is case-sensitive.

8. Click the Apply button.

WEP

Wired Equivalent Privacy (WEP) security is an authentication and data encryption mode that

is superseded by WPA-PSK and WPA2-PSK. WEP supports speeds of up to 54 Mbps and

does not function with WPS.

Note: The WEP option displays only if you select Up to 54 Mbps from the

Mode list.

¾ To configure WEP security:

1. Log in to the router.

For more information, see Use NETGEAR genie after Installation on page 17.