User's Manual

genie BASIC Settings

A750 Wireless Dual Band Gigabit Router R6050

Internet Setup

You can view or change ISP information.

¾ To set up your Internet connection:

1. Log in to the router.

For more information, see Use NETGEAR genie after Installation on page 17.

2. Select BASIC > Internet.

3. Select one of the following radio buttons:

• Ye

s. Select the encapsulation method and enter the login name. If you want to

change the login time-out, enter a new value in minutes.

• No. Enter the account and domain names, only if needed.

These fields display when no login is required:

• Account Name (If required). Enter the account name provided by your ISP

. This

might also be called the host name.

• Domain Name (If required). Enter the domain name provided by your ISP

These fields display when your ISP requires a login:

• Internet Service Provider. Select PPPoE, L2TP, or PPTP.

• Login.

The login name provided by your ISP. This login name is often an email

address.

• Password.

The password that you use to log in to your ISP.

• Service Name (if Required). If your ISP provided a service name, enter it here.

• Connection Mode. Select Always On, Dial on Demand, or Manually Connect.