User's Manual

Advanced Settings
129
A750 Wireless Dual Band Gigabit Router R6050
2. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
3. Select the Port Triggering radio button.
4. Clear the Disable Port Triggering check box if it is selected.
Note: If the Disable Port Triggering check box is selected after you
configure port triggering, port triggering is disabled. However, any port
triggering configuration information you added to the router is retained
even though it is not used.
5. In the Port T
riggering Time-out field, enter a value up to 9999 minutes.
The default value is 20 minutes. This value controls the inactivity timer for the designated
inbound ports. Because the router cannot detect when the application has terminated, the
inbound ports close when the inactivity time expires.