User's Manual
Table Of Contents
- WN3000RPv2 WiFi Range Extender
- Contents
- 1. Get to Know Your Extender
- 2. Install Your Extender
- 3. Manage the Extender Network and Settings
- Log In to the Extender After Initial Setup
- Change the admin Password
- Set Up Password Recovery for admin
- Use the Smart Setup to Connect the Extender to a Network
- Use the WPS Wizard for WiFi Connections
- View or Change Advanced Wireless Settings
- View or Change the WPS Settings
- Set Up a Wireless Access List
- Manage Profiles
- 4. Monitor and Maintain the Extender
- 5. FAQs and Troubleshooting
- A. Supplemental Information
Get to Know Your Extender
7
WN3000RPv2 WiFi Range Extender
Extender Side and Bottom Panels
The side panel has buttons, and the bottom panel has the Factory Reset button and an
Ethernet port.
Power On/Off button
WPS button
Factory Reset button
Ethernet port
Figure 2. Extender side and bottom panels
How the Extender Works
The extender increases the distance of a WiFi network. The extender connects to your
network’s WiFi signal and it broadcasts its own WiFi signal. When you are too far away to
connect to your network’s WiFi signal, you can connect to an extender WiFi signal instead.
Existing WiFi
Sometimes your router
does not provide the WiFi
coverage you need.
WiFi Range
Extender
Boosts the range of your
existing WiFi and creates
a stronger signal in
hard-to-reach areas.
Figure 3. The extender WiFi signals reach areas outside of the range of your router