User's Manual

Supplemental Information
40
WN3000RPv2 WiFi Range Extender
Factory Default Settings
The following table includes the factory settings for the extender. You can use the Factory
Reset button or the Erase feature to return the extender to these settings.. (See Return the
Extender to Its Factory Settings on page 31.)
Feature Setting
Setup Wizard Enabled
Wireless communication Enabled
Wireless network names (SSID)s NETGEAR_EXT
Security Disabled
Transmission speed Auto
1
1. Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Country/region Varies by region
Operating mode 802.11n, 802.11g, 802.11b
Data rate Up to 300 Mbps <<TBD>>
DHCP Client enabled
Technical Specifications
The following table includes the product specifications.
Extender Specifications
Network protocol and standards
compatibility
Data and routing protocols: TCP/IP, DHCP server and client, DNS
relay
,<<TBD>>
Power consumption 100-240V ~0.2A, 50-60Hz
Physical specifications Dimensions: 67 x 55 x 34 mm
W
eight: 0.098 kg
Environmental Operating temperature: 32° to 140°F (0° to 40°C)
Operating humidity: 90% maximum relative humidity
,
noncondensing
Electromagnetic emissions: Meets requirements of FCC Part 15
Class B.
Interface Local: 10BASE-T
, 100BASE-Tx, RJ-45
802.1
1n, 802.11g, 802.11b