User's Manual

Monitor and Maintain the Extender
31
WN3000RPv2 WiFi Range Extender
CAUTION:
After you click the Restore button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting!
7. Click the Restore button.
A confirmation pop-up screen displays.
8. Confirm your decision.
The extender restarts. This process takes about one minute.
Return the Extender to Its Factory Settings
To reset the extender to factory default settings, you can use either the Factory Reset button
or the Erase feature. For information about the factory settings, see Factory Default Settings
on page 40.
Use the Factory Reset Button to Restore Factory Settings
CAUTION:
This process erases any settings that you have configured in the extender.
 To restore factory settings:
Factoy
Reset
button
1. Insert a paper clip into the Factory Reset
hole and hold it until the Power LED blinks
amber.
2. Release the button.
All the LEDs turn off for about three
seconds.
The Power LED lights solid amber for about
30 seconds.
The Power LED
lights solid green.
The extender returns to its factory settings.
When you plug in the extender, it detects the
position of its
Access Point/Extender switch.