User's Manual
Table Of Contents
- WN3000RPv2 WiFi Range Extender
- Contents
- 1. Get to Know Your Extender
- 2. Install Your Extender
- 3. Manage the Extender Network and Settings
- Log In to the Extender After Initial Setup
- Change the admin Password
- Set Up Password Recovery for admin
- Use the Smart Setup to Connect the Extender to a Network
- Use the WPS Wizard for WiFi Connections
- View or Change Advanced Wireless Settings
- View or Change the WPS Settings
- Set Up a Wireless Access List
- Manage Profiles
- 4. Monitor and Maintain the Extender
- 5. FAQs and Troubleshooting
- A. Supplemental Information
Manage the Extender Network and Settings
20
WN3000RPv2 WiFi Range Extender
4. Select Smart Wizard.
The Smart Wizard displays the switch setting on your extender. In this example, the
switch is set to Extender, which is the right setting if you want your extender to use WiFi to
connect to your network.
The extender finds the 2.4 GHz wireless networks in your area and displays a list.
5. To select the network you want the extender to join, do one of the following:
• Select the radio button for the network.
• Select the Manually input my wireless SSID radio button and type the name of the
network.
6. Enter the security settings for the network that you selected.
The extender finds the 5 GHz WiFi networks in your area and prompts you to select a 5
GHz WiFi network
7. If your router or gateway broadcasts a 5 GHz WiFi network, select it from the list. Otherwise,
click the Skip button.