User's Manual
Table Of Contents
- WiFi Cable Modem Router C3700
- Contents
- 1. Connect to the Modem Router
- 2. NETGEAR genie Basic Settings
- 3. NETGEAR genie Advanced Home
- 4. Security
- 5. Administration
- 6. Advanced Settings
- 7. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Connect to the Modem Router
9
WiFi Cable Modem Router C3700
Gateway Rear Panel
Power adapter input
Ethernet LAN ports
Coaxial cable connector
Power On/Off button
Reset button
USB port (optional)
The rear panel includes the following connections when viewed from top to bottom:
• Reset button. Y
ou can return the modem router to its factory settings. Press and hold
the Reset button for over 7 seconds. The modem router resets and returns to its factory
settings. See Factory Default Settings on page 71.
• Phone port. A telephone connection for an analog phone line.
• Two Gigabit Ethernet LAN ports. Use these ports to connect local computers.
• Coaxial cable connector. Attach a
coaxial cable to the cable service provider connection.
• Power adapter input. Connect the power adapter unit here.
• Power On/Off button. Press to turn on power
. Press again to turn of
f power.
Power Supply Manufacturers and Models
Use only power supplies listed here: