User's Manual
Table Of Contents
- WiFi Cable Modem Router C3700
- Contents
- 1. Connect to the Modem Router
- 2. NETGEAR genie Basic Settings
- 3. NETGEAR genie Advanced Home
- 4. Security
- 5. Administration
- 6. Advanced Settings
- 7. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Administration
44
WiFi Cable Modem Router C3700
The following screen displays.
2. In the Utility list, select Traceroute.
3. Specify the following parameters for the traceroute utility .
• Target. The IP address or host name of the computer you are tracing.
• Max Hops. The maximum number of hops to allow when tracing the route.
• Data Size
. The input the size (in bytes) of the packet.
• Base Port
. The port number to send the packet to.
• Resolve Host
. Select on to resolve the host name to the IP address.
4. Click Start T
est
.
The traceroute results display.
To clear the results from the display:
Click Clear Results.
DS Throughput Utility
To display the ????????????, run the DS throughput utility.
To run a DS throughput test:
1. From the Advanced tab, select Administration > Diagnostics.